OBDSTAR X300 DP Plus (X300 PAD2) Key Programmer C Package Full Configuration
Why buy X300 DP Plus from us?
It is a full version X300 DP PLUS: Immobilizer+Mileage correction/ Odometer Adjustment+Special function (Oil reset +ABS+Battery matching+ECU programming+EPB+Throttle programming+Airbag rest+TPMS+Steering angle reset+OBDII+DPF+Injector code+Supension matching+Gear learning+CVT learning+EEPROM+Key renewing+ECU cloning) Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+Ignition coil+Remote tester.
What do I need to pay attention to before buying X300 DP Plus?
1.Please register first after receiving the product. OBDSTAR Distributor code: 0086A002
2.X300 DP Plus supports English only
3.It doesn't support the following car models: DAIHATSU/ PROTON/ MAHINDRA/ MARUTI/ TATA/ HOLDEN/ LADA/ PERODUA/ IRAN. (Please contact local dealers from your area to get authorization)
4.Please check the supported car list of vehicle functions on the official website before you buy this device. If you are not sure whether the function or vehicle is supported, please feel free to inquiry us online.
5.One year free update online, after that, 500USD for a one year update subscription.
X300 DP Plus C Full Configuration Software Advantages:
Advanced Functions
1. Support MAZDA CX30 2020-，MAZDA3 2020- key programming(support AKL and free pincode);
2. Support PSA 2015- CONTINENTAL BSI-Q0X all keys lost reading pincode, DELPHI BSI read pincode by OBD in all keys lost, all series all years models key programming;
3. Support RENAULT /DACIA proximity add keys(free pincode) for below models:
CAPTUR II 2021-
CLIO V 2021-
TRAFIC 2022
4. Support RENAULT /DACIA proximity key programming(free pincode) for below models:
TRIBBER 2018-
ARKANA 2020-
LOGAN 2020-
MEGANE IV PH2 2020-
NEW ZOE 2020-
SANDERO 2020-
5. Support RENAULT /DACIA blade/ proximity key programming(free pincode) for below models:
DUSTER PH3 2018-
6. Support JEEP COMPASS 2021 proximity all parts number read pincode;
7. Support CHRYSLER/ JEEP/ DODGE all series all years models key programming;
8. Support battery reset for Audi and Volvo by BENCH.
ECU Clone
1. ECU Clone, means ECU duplication.
The device copies all the data from the original vehicle ECU, and then writes all data copied into ECU with the same hardware to realize the same ECU function with the original vehicle.
2. Clone directly when replacing a new or a used ECU!
Without online matching in the 4S store or removal of ECU bonding wire for reading and writing! Directly write without dismantling OBD!
3. Three features for ECU Clone:
A. Free of 4S online: break monopoly from 4S, benefiting automobile maintenance industry
B. Simplified operation procedures: realize foolproof operation
C. Non-dismantling with zero risks: read and write data without dismantling ECU
Switch activation function
(Today many instruments or audio of vehicles activate secondary power supply to go into power-on status by relevant module CAN communication on the vehicle, but sometimes an instrument or an audio is separated from vehicle CAN BUS network, causing startup failure when it needs to be repaired by an auto technician. This function can simulate CAN communication to activate secondary power supply, so the instrument or the audio enters into power-on status. In this way, it not only can test and verify the instrument or the audio, but also save an enormous cost for an auto technician to purchase a large number of startup platforms of various vehicles and wiring harnesses!)
Add “Help”functions:
1. Contain built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc.
2. Car list: directly get it on the device
3. Upgrade Announcement: all details are available on the device
4. Customers can look up the features or uniquely support functions on the device
5. Help notes: built-in help notes for each model or function
8. Wiring diagrams: built-in ECU wiring diagrams, more intuitionistic and convenient
OBDSTAR X300 DP Plus C Full Configuration Hardware Advantages:
1. Built-in VCI box
2. 8-inch touch screen
3. Charge directly via OBD interface
4. Practical and high-end gift box
5. Industrial design with silicone case
6. Back bracket design: prop on the steering wheel or stand on the table
7. P001 programmer: EEPROM adapter + RFID adapter + key renew adapter
8. Add the clip of reading SOP 8 PIN EEPROM
9. C001/C002 circuit board to read and write chip data with welding
10. IMMO induction coil to detect the key induction coil failure of the vehicle
11. Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)
How to use OBDSTAR X300 DP Plus Induction Coil?
1. Functional Overview:Induction Coil is used to detect the key induction coil failure of the vehicle.
2.Application Method:Attach the Induction Coil to the key induction coil, and insert the key or turn ignition on, while Induction Coil red indicator lights up and goes out, indicating the key induction coil is good;the indicator does not illuminate to indicate the key coil is damaged, please check and repair or replace.
OBDSTAR X300 DP Plus A+B+C Full Configuration Technical Parameters
● Operation system: Android 5.1.1
● CPU: Exynos4418 Dual Core ARM Cortex A9 1.4GHz
● Battery: 3700mA, rechargeable polymer lithium battery
● Extension memory card: 32G Micro SD (TF) card supported
● Memory capacity:1GB
● Storage capacity: 32GB
● LCD: 8.0 inch
● LCD resolution: 1280*800
● Touch screen: Capacitive touch screen
● Camera: 5 mega rear view camera
● Wi-Fi: supported
● Working temperature: -10℃ ~ 55℃（14℉ ~ 131℉ ）
● Storage temperature: -20℃ ~ 70℃（-4℉ ~ 158℉ ）
● Weight: about 1.0 Kg
● Dimension: 254mm*174*mm*35mm
Register directly on tablet
Please connect to the network after receiving the device, enter the settings to register first.
Packing List:
Note: Haima-17 is not included in the package because it is a connector suitable for Chinese cars.
1* X300 DP PLUS Key Master DP Plus Unit
1* Main Wire
1* 12V2A DC Charger
1* KIA-20
1* OBD II-16 Connector
1* HONDA-3
1* HYUNDAI/KIA-10
1* IMMO Induction Coil
1* Multi-functional Jumper
1* P001 Programmer Unit
1* C001/C002 Circuit Board
1* W001
1* W002
1* W003
1* RT100 Unit
1* Configuration List/Certificate/Quick Start Guide Fold
1pc x FCA 12+8 Adapter
1pc x P004 adapter
1pc x P004 jumper
Reply
Was This Answer Helpful?？
{{ item.agree }}
{{ item.not_agree }}
