OBDSTAR P003+ Bench/Boot Adapter for Reading ECU CS PIN Work With OBDSTAR DC706 Series Tablets

OBDSTAR P003+ Kit is designed for reading BOSCH ECU data, CS, Pincode ect, for Audi, for Citroen, for DS, for Mahindra, for Peugeot, for Skoda, for SEAT, for Volkswagen etc. More models are in development.

Work with OBDSTAR IMMO series tablets:

OBDSTAR X300DP Plus Key Master DP Plus

X300 Pro4 Key Master 5

OBDSTAR DC706 ECU TCU Clone Tool

OBDSTAR P003+ Kit Highlights:

1. Portable Design

2. Easy Operation

3. High Performance

Functions:

1. For Continental PCR 2.1 reading CS, PinCode, MAC value

2. For Bosch MED17.4.4 reading eeprom , PinCode

3. For Bosch EDC17C60 reading eeprom , PinCode

4. For Bosch MD1CS018 reading eeprom, PinCode

5. For Bosch MED17XX/EDC17XX reading eeprom, flash, CS, PinCode, MAC value

6. For Bosch ME17XX reading & writing eeprom, flash

7. Clone 6HP, IAW 9GV, 9GF, 10GF etc ECUs/TCUs with DC706

OBDSTAR P003+ Kit Supported ECU list:

Supports ECU including BOSCH EDC17U01(TC1766), MED17.5(TC1766), MED17.5.1(TC1766), MED17.5.20(TC1766), MED17.5.5(TC1766), MED17.5.5 HW2(TC1766), EDC17C46(TC1767), ME17.5.6(TC1767), ME17.5.20(TC1767), MED17.5.2(TC1767), MED17.5.5(TC1767), MED17.5.5 HW2(TC1767), MED17.5.21(TC1782), MED17.5.25(TC1782), EDC17C54(TC1797), EDC17C64(TC1797), EDC17CP44(TC1797), EDC17CP44 MS(TC1797), ME17.1.1(TC1797), ME17.1.6(TC1797), MED17.1.1(TC1797), MED17.1.1 MS(TC1797), MED17.1.6(TC1797), MED17.4.4(TC1793), MD1CS018(Euro 6/TC298TP), MG1CS042(Euro 6/TC298TP), MG1CS003(Euro 6/TC298TP) etc.

OBDSTAR P003+ Kit Overview:

1. Diag cable OBDconnector(male)

2. Connect P003 connector(female)

3. P003 adapter

4. Boot jumper(spring needle)

5. Boot jumper(welding)

6. ECU pin connector

7. ECU boot connector

8. 12V power

Connecting Methods:

BENCH MODE

Step 1:Connect 1,2,3 together as pic below;

Step 2: connect the ECU pin connector to the ECU according to the wiring diagram;

Step 3: connect 12V power with diagnostic device;

Step 4: read data on diagnostic device.

BOOT MODE

Step 1: Connect 1, 2, 3 together as pic below;

Step 2: connect the ECU pin connector to the ECU according to the wiring diagram;

Step 3: connect 7 with 4 or 5 and connect it to ECU;

Step 4: connect 12V power with diagnostic device;

Step 5: read data on diagnostic device.

Package Includes:

1pc x P003+ Adapter

1pc x ECU BENCH jumper